Gas filter

Suitable for filtration of thr fuel gas and combustion air suplly

to all gas consuming appliances

Pmax 1~ 6 bar ( Rp1/2 ~ 2 1/2, DN40 ~ 250 )

To control gas and air inlet pressure for gas burners and appliances

in industry and for heating purposes.

Inlet pressure 400mbar /Outlet pressure ranges

- 2 ~ 55mbar ( Rp1/2 )

- 5 ~ 160mbar ( Rp3/4 ~ 1 1/2 )

- 5 ~ 100mbar ( Rp2 )

Governor for gaseous media, to be fitted to all types

of gas consuming appliances

Inlet pressure 0.2bar /Outlet pressure ranges

- 5 ~ 350mbar ( DN40 ~ 150 )

Inlet pressure 1~4bar /Outlet pressure ranges

- 5 ~ 350mbar ( Rp1/2 ~ 1 1/2)

- 40 ~ 160mbar ( DN40 ~ 250 )

The air/gas ratio controls serve to maintian a constant air-gas ratio

and to regulate the gas pressure upstream of gas burner

on installations without preheated combustion air.

Inlet 200mbar /outlet pressure 1 : 1

- ( Rp1/2 ~ 2 )

- ( DN65 ~ 150 )

Safaty valves for gas with spring-loaded valve disc for

safeguarding and controlling the gas and air supply to

gas burners.

Max inlet 150 ~ 200mbar

- ( Rp3/8 ~ 1 )

VG 15 to 40R.. , VG 40 to 65F..

For the protection, shut-off and release of the air and gas

supply to gas burner and gas devices with two-step operation.

Max inlet pressure130, 360mbar

- ( Rp1/2 ~ 1 1/2 )

- ( DN40 ~ 65 )

Solenoid relief valve

For soundness proving of gas armatures in conjunction with

a visual discharge unit.

Max inlet pressure 200, 1000mbar

- ( Rp1/2 ~ 1 1/2)

Butterfly valves are used to set thr flow rate of air and gas on

gas burner. With attached gear motor.

Max inlet pressure 300mbar

- ( DN15 ~ 150 ) for gas

- ( DN15 ~ 150 ) for air

- ( DN15 ~ 500 ) for air and flue gas

For all applications requiring precise and controlled roary

movement between 0 and 90 degrees or 0 and 160 degrees

with three-point step control.

Solenoid valves for gas

Gas safety valves with spring-loaded valve disc for safeguarding and

controlling the gas ans air supply to gas burners and gas devices.

The modular construction principle of the flow bodies permits individual

assembly with all components of the MODULINE range.

- ( Rp 3/8 ~ 2 ) max pressure 200mbar

Control of gas and air pressure in negative pressure cut-out

for low voltage.

- 0.4 ~ 500mbar ( Rp1/4 )

It is used on burners with mechanical combustion air supply systems,

on which a separate logic system controls the blower, and

on atmospheric burner.

Suitable for the ignition and control of gas burners in gas firing

installations of all types. Flame control by ionisation probe or UV-cell.

Simple trasmission of control signals and backsignals

via a field bus line.

UVS 1, 5, 6

High sensitive but insensitive to sunlight, daylight, infra-red radiation

and filament lamps to protected againt interruptions or short circuits

in the flame signal line.

Igniotion transformers for high-voltage ignition of gas burners and

gas-ignited or directry ignited oil burner.

input 115, 230V. / output 5, 7kV.

For the safe ignition and flame protection of atmospheric burner

in conjunction with our automatic burner controls IFS...

For the automatic ignition and control of gas burner, in conjunction

with the automatic burner controls IFS or PFS and the ignition

transformer TZI or TGI.

On industrial furnaces and kilns and gas fired installations in

the precious-metals, nonferrousmetals and light-alloys sector.

For measuring gas and air quantities and the current throughput.

Typical applications include secondary measurement of

the consumption in industrail installations. In particular for

monitoring and setting up of burner in gas appliances.

Measuring range : 1.6 ~ 1600m3/h.

- Mecanical counter head

- Electronic counter head